PALKUT – ST

These products are high performance neat cutting fluids, designed for a wide range of applications. The product meet the highest demands of operating, cutting conditions, tools & work piece materials. Each of these products differ in their viscosity & other characteristics etc. to cover a wide range of applications.

Category:

Description

PALKUT ST

These products are high performance neat cutting fluids, designed for a wide range of applications. The product meet the highest demands of operating, cutting conditions, tools & work piece materials. Each of these products differ in their viscosity & other characteristics etc. to cover a wide range of applications. These products offer stable oil film, excellent heat dissipation, EP properties & improved surface finish.

PALKUT ST-1,2

Non-staining type neat cutting oils containing chlorinated EP additives. These products are recommended for machining operation on mild steel, carbon steel, nickel steel and manganese steel such as thread grinding, form grinding, milling, honing & lapping etc

PALKUT ST-3

Non-staining type sulphurised fatty oil based neat cutting oil which covers a wide range of machining operations, aids in obtaining good surface finish & protects tool from excessive wear. Recommended for application in high speed automatic machine tools & multispindle lathes where operations like turning, honing etc. are performed. It is also suitable for application as general purpose machine tool lubricant.

PALKUT ST-4

It contains sulphurised & chlorinated additives which provides excellent performance in all machining operations on non-ferrous metals & can also be used for gear hobbling, gear shaving, screw cutting, tapping, milling etc.

PALKUT ST-5

It is an active sulphur-chlorinated type cutting oil which is recommended for deep hole drilling & deep hole boring. It is suitable for cutting of ferrous & ferrous alloys only.

PALKUT ST-6

It is a neat cutting oil containing sulphurised fat besides active sulphur & chlorinated additives. Recommended for severe metal cutting operations including gear cutting, broaching, thread cutting, hobbing etc. It is not recommended for use on non-ferrous metals.

PACKING

210L, 50L, 20L

CHARACTERISTICS
Sr.No PROPERTIES PALKUT ST
ST-1 ST-2 ST-3 ST-4 ST-5 ST-6
1 Appearance Clear & bright Amber Fluid Dark Brown
2 Kinematic Viscosity, cSt @40ºC, min. 5-8 15-25 15-25 27-35 11-15 27-35
3 Flash Point, COC, ºC, min. 120 150 150 160 135 160
4 Contains
a) Inactive Sulphur NO NO YES YES NO YES
b) Active Sulphur NO NO NO NO YES YES
c) Chlorine YES YES NO YES YES YES
* The specifications are subject to variations/development/customization.