Pal EP
Pellentesque habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas. Vestibulum tortor quam, feugiat vitae, ultricies eget, tempor sit amet, ante. Donec eu libero sit amet quam egestas semper. Aenean ultricies mi vitae est. Mauris placerat eleifend leo.
Description
Pal EP, 000, 00, 0, 1, 2 & 3 are lithium-based products containing highly-refined mineral oils and fortified with extreme pressure (EP) additives as well as corrosion and oxidation inhibitors. These greases have been formulated with additives that provide good film strength under medium-to-high loads.
They are designed for plant-wide lubrication, the range extending from NLGI-2 for general purpose bearing lubrication to NLGI-0(semi-fluid grease) suitable for centralized lubrication systems and grease filled gearboxes. These greases provide good protection against rust and corrosion as well as resistance to water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. These greases also possess high mechanical stability, good adhesion and anti-wear properties, thus enhancing component life and increase re-lubrication intervals.
Applications
Recommended for lubrication of all plain and anti-friction bearings, heavy duty ball and roller bearings of industrial equipment used in steel plants, heavy engineering units, machine tool units, textile mills, paper mills, fertilizer plants, sugar mills etc. particularly where contacting surfaces are exposed to very heavy pressure and shock loads and for continuous service up to 130ºC.
These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using grease described in this product bulletin.
Performance Level
IS 7623-1993 & NLGI-0,1&2 specifications.
Packing
180KG, 18KG
Characteristics
S. NO. |
PROPERTIES |
EP-000 |
EP-00 |
EP- 0 |
EP-1 |
EP-2 |
EP-3 |
|
1. |
Appearance | Brown | ||||||
2. |
Soap Type | Lithium | ||||||
3. |
Base Oil Type | Mineral | ||||||
4. |
Base Oil Viscosity, @40°C |
150 |
155 |
|||||
5. |
Viscosity Index of base oil, min. |
95 |
90 |
|||||
6. |
Cone Penetration, @25°C ± 0.5°C |
445-475 |
400-430 |
355-385 |
310-340 |
265-295 |
220-250 |
|
7. |
Drop Point, °C min. |
160 |
180 |
180 |
180 |
180 |
180 |
*The specifications are subject to variations/development/customization.