Pal Flush
Flushing Oils
Products Description
PAL FLUSH is formulated for flushing of engine, transmission and other lubrication systems after the old oil has been drained out. It is a blend of highly refined light mineral oil and detergent/dispersant additives to enhance removal of sludge and lacquers.
Recommended for use where a system’s history is unknown or service fill lubricant may have been used beyond its oil drain interval / contamination problem.
Direction for Use
- Warm up the oil by running the system till the oil reaches normal operating temperature.
- Open the drain plug and drain out the used oil.
- Fill the system with PAL FLUSH OIL between minimum and maximum level.
- Run the system without load for 5 to 10 minutes or till the oil reaches normal operating temperature and circulates throughout the system.
- Drain out the flushing charge and ensure that the system is free of sludge and lacquers or any other contamination. If the examination is not satisfactory, repeat the procedure.
- Refill the system with recommended lubricant.
Packing
210L, 50L, 20L
Characteristics
| S. NO. | PROPERTIES | PAL FLUSH |
|---|---|---|
| 1. | Kinematic Viscosity, cSt @ 40°C | 21-23 |
| 2. | Kinematic Viscosity, cSt @ 100°C | 3-4 |
| 3. | Specific gravity, Max. | 0.901 |
| 4. | Flash Point, COC, °C, Min. | 170 |
| 5. | Pour Point, °C, Max. | -3 |
*The specifications are subject to variations/development/customization.
Enquire now 
