Dot 4

ISO 4925 Class 4 Brake fluid
Palco DOT 4 Brake Fluid High-Performance Synthetic Brake Oil

High-Performance Brake Fluid for Maximum Safety

DOT-4 BRAKE FLUID – High Boiling Point, Superior Brake Protection & Reliable Stopping Power

DOT-4 is a premium synthetic brake fluid formulated with polyalkylene glycol ethers, borate esters and advanced additives to deliver excellent thermal stability, superior corrosion protection and resistance to vapour lock. It ensures consistent braking performance for modern hydraulic brake systems operating under moderate to severe driving conditions.

DOT-4 Synthetic Fluid High Boiling Point Thermal Stability Corrosion Protection
Business Enquiry
WhatsApp
Call

Get a Free Quote in 24 Hours

Tell us your application – our engineer will recommend the right grade and pack size.

No spam. We usually reply within a few hours.
ISO 9001 (if applicable)Since 1965Pan-India Distribution

Why DOT-4?

HEAT: Non-melting up to 500C

RESIST: Oxidation and corrosion resistant

SHOCK: High shock load absorption

CHEM: Works in hostile chemical environments

BRAKE: Reliable Stopping Power HEAT: High Temperature Performance SAFE: Resists Vapour Lock PROTECT: Rust & Corrosion Control

Built For These Applications

Passenger Cars Motorcycles Commercial Vehicles Hydraulic Brake Systems ABS Brake Systems

DOT-4

Download Technical Datasheet (PDF)

Products Description

It is a high boiling Synthetic Brake fluid which is made from mixed Polyalkylene Glycol ethers and Borate esters and doped with various high-performance additives and inhibitors which give ultimate system protection against the effects of rust and corrosion and high temperature vapour lock. The Formulations are balanced so that the Vapour lock point is able to sustain at a higher level than the conventional glycol ether-based fluids during the service life of the product.

Features

  • High Level of Thermal and Chemical Stability.
  • High Dry and Wet ERBP (Equilibrium Reflux Boiling Point).
  • Resist Moisture that can cause Vapour Lock brake Failure.
  • Very good Low Temperature Fluidity.

Applications

RECOMMENDED for Hydraulic system for Modern fuel-efficient motor vehicles such as passenger cars (Maruti, Hyundai, General Motors, BMW, Daimler Benz, Tata etc.), Trucks, Buses, Tractors, Heavy Earth Moving Equipment’s etc. operating under moderate to severe duty Conditions.

Performance Level

SAE J 1703, IS 8654-2019 (Type 1), FMVSS No. 116 DOT-4, ISO 4925 Class 4 Specifications.

Packing

250ml, 100ml

Characteristics

S.NO. PROPERTIES DOT-4
1. Colour Light Yellow
2. Kinematic viscosity,-40ºC, max. 1400
3. Kinematic viscosity, cSt,@ 100ºC, min. 1.8
4. pH Value 8-10
5. Wet ERBP, °C, min., 158
6. ERBP, °C, Min (Equilibrium Reflux Boiling Point) 248

*The specifications are subject to variations/development/customization.