Paras Lubricants - Synthetic Cutting Fluid Manufacturer - PAL SYNCO-100,200  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Oils

HOME » PRODUCTS » Industrial oils » PAL SYNCO-100,200

 
 
 

PAL SYNCO-100,200

 
INDUSTRIAL OILS  

These are premium quality water-soluble oil free fully synthetic type Coolant, specially developed for use on ferrous metals only. These oils does not undergo bacterial degradation and leave objectionable odour. Further These are non foaming, non toxic, non hazardous, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to high mixing ratio and long service life.

PAL SYNCO-100 is fortified with rust, corrosion inhibitor, bactericide, fungicide etc.  It has several advantages over conventional soluble cutting oil. Recommended for machining and grinding of ferrous metals only. 

PAL SYNCO-200 contains EP additive to give high surface finish. Recommended for machining and grinding of iron, steel, non-alloyed steel and nickel-chrome steel.

Not recommended for the machining of non-ferrous metals.

Dilution ratio with water varies between 2%-3% depending upon the operation and product handled.

  • Concentrated mixture may lead to paint peel off in the machines and some discoluration of the operator’s skin.
  • Coolant should be used only in clean circulating system.

PERFORMANCE LEVEL

IS 11186-1985(Reaffirmed 1990) specifications

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr.No

Properties

PAL SYNCO-100

PAL SYNCO-200

1.

Appearance

Green

Green

2.

Solution Appearance, @2% in distilled water

Clear fluorescent

Green

3.

Cast Iron Corrosion, @250ppm,500ppm

Passes

Passes

4.

pH 2% dilution in distilled water

10

9

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Pal Rex
Pal Lube
Paltherm-500,600
Paltherm S -Light.Medium
Pal Rock Drill-L,H
Pal SMR-2, 3
Palkut SL,SL Super
Pal Synco-100,200
Pal Synco-300,400
Palkut ST
Pal Rustrans-L,H
Pal Rustnil-L,H
Pal Rustop -910,920,940
Pal Rustop -247
Pal Rustop -930
Pal Oil Reserve
Palquench - S,C,H,HC
Pal Draw ST,ST-2,EP
Pal Forge 68,100
Pal ST Gear-90,140
Pal Glass Mould
Pal Ingol Zn
Pal Ingol EP
Pal OGC-120,140
Phydol (R&O)
Phydol AW
Phydol HLP
Pal Turbine
Palcomp C-100,150,220,320
Palcomp -32,46,68,100,150
Pal Hone
Pal Way-32,68,100,120
Palknit-22,32
Pal Powerfluid-20
Pal Woolpro-23
Pal Spin-10,12,22
Pal Loom
Pal SAE-40,20W40
Pal Hylube- 40,20W40
Pal PMG- 20W40(Shaktiman)
Pal PPG4-15W40,PPG4-20W40
Pal Marine
Pal Flush
Pal Cyl
Mineral based refrigeration oils
Semi-Synthetic refrigeration oils
Industrial Greases
Industrial Specialities
Shock Absorber Oil
Synthetic Lubricants

Site Powered by createsoftsolutions.com