DOWNLOAD PDF

Pal Synco-100, 200

PAL SYNCO-100, 200

SYNTHETIC CUTTING FLUID

These are premium quality water-soluble oil free fully synthetic type Coolant, specially developed for use on ferrous metals only. These oils does not undergo bacterial degradation and leave objectionable odour. Further These are non foaming, non toxic, non hazardous, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to high mixing ratio and long service life.

PAL SYNCO - 100 is fortified with rust, corrosion inhibitor, bactericide, fungicide etc. It has several advantages over conventional soluble cutting oil. Recommended for machining and grinding of ferrous metals only

PAL SYNCO – 200 contains EP additive to give high surface finish. Recommended for machining and grinding of iron, steel, non-alloyed steel and nickel-chrome steel.

Not recommended for the machining of non-ferrous metals.

Dilution ratio with water varies between 2%-3% depending upon the operation and product handled.

  • Concentrated mixture may lead to paint peel off in the machines and some discoluration of the operator’s skin.
  • Coolant should be used only in clean circulating system.

PERFORMANCE LEVEL

IS 11186-1985(Reaffirmed 1990) specifications

PACKING

210L, 50L, 20L

CHARACTERISTICS
Sr. No PROPERTIES PAL SYNCO - 100 PAL SYNCO - 200

1.

Appearance

Green

Green

2.

Solution Appearance, @2% in distilled water

Clear fluorescent

Green

3.

Cast Iron Corrosion, @250ppm,500ppm

Passes

Passes

4.

pH 2% dilution in distilled water

9

10

* The specifications are subject to variations/development/customization.