MONOGRADE ENGINE OILS
These oils are high quality monograde engine oils, meeting API:SC/CC performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines.
PRODUCT FEATURES
 |
PHB-40&50 oil viscosities are suitable for new / running and old engines respectively. |
|
Good anticorrosion, antirust, antioxidation and antiwear properties. |
|
Reduced exhaust emission due to high detergency. |
|
Increased oil drain period interval due to good dispersant properties. |
|
Lower oil consumption and increased fuel efficiency. |
|
High performance features, keeps engine clean and minimizes maintenance cost. |
APPLICATIONS
Petrol engines, naturally aspirated and supercharged diesel engines, power generating sets etc., operating under moderate duty conditions.
PRECAUTIONS
|
Always change filter when changing engine oil. |
|
Short trips; stop-and-go traffic; extreme heat or cold; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes. |
PERFORMANCE LEVEL
IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B and API:SC/CC specifications.
PACKING
PHB 50 -210Ltr.,3.5Ltr.,
PHB 40 (BONUS) -210Ltr.,20Ltr.,5Ltr.,1Ltr.,500ml
CHARACTERISTICS |
Sr. No. |
Properties |
PHB- 40 (BONUS) |
PHB- 50 |
1. |
Appearance |
Clear, bright Red colour |
2. |
Kinematic Viscosity, cSt @ 100° C |
12.5-16 |
16.5-20 |
3. |
Viscosity Index, min. |
95 |
95 |
4. |
Pour Point, °C, max. |
-6 |
-3 |
5. |
Flash Point, COC, °C, min. |
220 |
230 |
6. |
TBN, mg. KOH/gm. |
5-6 |
5-6 |
| * The specifications are subject to variations/development/customization. |
|
|
