SYNTHETIC CUTTING FLUID

These are premium quality water-soluble oil free fully synthetic type Coolant, specially developed for use on ferrous metals only. These oils does not undergo bacterial degradation and leave objectionable odour. Further These are non foaming, non toxic, non hazardous, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to high mixing ratio and long service life.

PAL SYNCO-100 is fortified with rust, corrosion inhibitor, bactericide, fungicide etc.  It has several advantages over conventional soluble cutting oil. Recommended for machining and grinding of ferrous metals only. 

PAL SYNCO-200 contains EP additive to give high surface finish. Recommended for machining and grinding of iron, steel, non-alloyed steel and nickel-chrome steel.

Not recommended for the machining of non-ferrous metals.

Dilution ratio with water varies between 2%-3% depending upon the operation and product handled.

• Concentrated mixture may lead to paint peel off in the machines and some discoluration of the operator’s skin.
• Coolant should be used only in clean circulating system.

PERFORMANCE LEVEL

IS 11186-1985(Reaffirmed 1990) specifications

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

210 Ltr. ,50 Ltr., 20 Ltr.