PAL POWERFLUID-20 is a fluid medium specially developed to meet the requirements of all types of transformers from medium to extra high voltage range ensuring optimum performance and safety of the transformers. It cools the transformers and insulates the electrical coils from shorting out. It is non-conductive and has excellent fluidity, even at low temperature (-6ºC). It has high flash point resulting in low evaporation losses and has good dielectric properties resulting in minimum power loss.
It is formulated with highly refined mineral oil, stable at high temperatures and excellent electrical insulating properties. Special refining steps are used to ensure that oil-soluble current-carrying ionic materials are removed.
Recommended for use in Transformers, oil immersed circuit breakers and switchgears. This oil is also widely used in special transformers designed to operate at elevated temperatures and in low maintenance / maintenance- free transformers designed to operate for longer periods.
This product is not recommended for use where safety specifications require the use of non- flammable insulating oil. Also not recommended for use where synthetic dielectric fluids and uninhibited oils are required.
PERFORMANCE LEVEL
IS 335-1993 (Reaffirmed 2005) specifications.
PRECAUTION
Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only.
PACKING
210 Ltr.
CHARACTERISTICS
Sr.No
Properties
PAL POWERFLUID- 20
1.
Viscosity, cSt @40°C,Max.
20
2.
Density@29.5°C, g/cm³, Max.
0.89
3.
Flash Point (PMCC), °C, Min
150
4.
Pour Point, °C, Max
-6
5.
Total acidity, mg KOH/gm
0.03
6.
Electric Strength(breakdown voltage), KV (rms),Min
30
* The specifications are subject to variations/development/customization.
