Paras Lubricants - Lithium Soap Industrial Grease Manufacturer, PAL LIMOX  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Indusstrial Greases - Lithium Soap Industrial Grease Manufacturer, PAL LIMOX

HOME » PRODUCTS » Industrial greases » PAL LIMOX

 
 

PAL LIMOX

 
INDUSTRIAL GREASES  

This grease is multipurpose lithium base grease, compounded with extreme pressure (EP) additives as well as finely dispersed molybdenum disulphide (MoS2), which is very effective solid lubricant with extremely good anti-scuffing characteristics. This grease is also fortified with corrosion and oxidation inhibitors and additives that provide good film strength under medium-to-high loads.

PAL LIMOX grease provide good protection to contacting surfaces against rust, corrosion and wear as well as resistance to water wash-out. This grease also has an application in sliding motions where the prevention of scuffing is desirable and may be used in dry or moist conditions. This grease also possess good mechanical stability, load carrying properties, resistance to shock loads and overcomes boundary lubrication conditions, thus enhancing component life and increasing re-lubrication intervals.

Recommended for lubrication of heavily loaded slow/medium speed bearings of all types and is particularly useful in preventing bearing damage caused by excessive vibration or shock loads. When exposed to extreme operating conditions, particularly where contacting surfaces are exposed to very heavy pressure and shock loads and for continuous service up to 130ºC this grease helps prevent the depletion of normal grease lubrication by a residual coating on the metal surface with molybdenum disulphide to give 'dry' or 'solid' lubrication.

It is not recommended for use in small, high speed ball and roller bearings.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using grease described in this product bulletin.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with grease is injurious to health. Clean properly with soap and water.
Grease: Grease should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PAL LIMOX

1.

Appearance

Black

2.

Soap Type

Lithium

3.

MoS2

3%

4.

Base Oil Type

Mineral

5.

Base Oil Viscosity, @40°C

120

6.

Viscosity Index of base oil, min.

90

7.

Cone Penetration, @25°C±0.5°C

265-295

8.

Drop Point,°C min.

180

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Pal AP-2,3
Pal Mega Life
Pal Limox
Pal Cup
Pal EP-0,1,2
Pal W.B.
Pal NSG,MDG
Pal Lithcom 2,3
Industrial Specialities
Synthetic Lubricants

Site Powered by createsoftsolutions.com