Paras Lubricants - Lithium based Extreme Pressure Industrial Grease Manufacturers, PAL EP  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Greases - Lithium based Extreme Pressure Industrial Grease Manufacturers, PAL EP

HOME » PRODUCTS » Industrial greases » PAL EP-0,1,2

 
 

PAL EP-0,1,2

 
INDUSTRIAL GREASES  

These greases are lithium-based products containing highly-refined mineral oils and fortified with extreme pressure (EP) additives as well as corrosion and oxidation inhibitors. These greases have been formulated with additives that provide good film strength under medium-to-high loads.
      
They are designed for plant-wide lubrication, the range extending from NLGI-2 for general purpose bearing lubrication to NLGI-0(semi-fluid grease) suitable for centralized lubrication systems and grease filled gearboxes. These greases provide good protection against rust and corrosion as well as resistance to water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. These greases also possess high mechanical stability, good adhesion and anti-wear properties, thus enhancing component life and increase re-lubrication intervals.

Recommended for lubrication of all plain and anti-friction bearings, heavy duty ball and roller bearings of industrial equipment used in steel plants, heavy engineering units, machine tool units, textile mills, paper mills, fertilizer plants, sugar mills etc. particularly where contacting surfaces are exposed to very heavy pressure and shock loads and for continuous service up to 130ºC.

These greases are compatible only with lithium base grease. Sealed bearings should be thoroughly cleaned before using grease described in this product bulletin.

PERFORMANCE LEVEL

IS 7623-1993 & NLGI-0,1,2 specifications.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this grease is injurious to health. Clean properly with soap and water.

Grease: Grease should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PAL EP-0

PAL EP-1

PAL EP-2

1.

Appearance

Brown

2.

Soap Type

Lithium

3.

Base Oil Type

Mineral

4.

Base Oil Viscosity, @40°C

120

5.

Viscosity Index of base oil, min.

90

6.

Cone Penetration, @25°C ± 0.5°C

355-385

310-340

265-295

7.

Drop Point, °C min.

180

180

180

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Pal AP-2,3
Pal Mega Life
Pal Limox
Pal Cup
Pal EP-0,1,2
Pal W.B.
Pal NSG,MDG
Pal Lithcom 2,3
Industrial Specialities
Synthetic Lubricants

Site Powered by createsoftsolutions.com