Paras Lubricants - Industrial Rubber Process Oils Manufacturer, PAL RUBPRO  A 1000, N 20, P 30  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Rubber Process Oils Manufacturer, PAL RUBPRO  A 1000, N 20, P 30
HOME » PRODUCTS » Industrial Specialities » PAL RUBPRO
 
 
 

RUBBER PROCESS OILS

 

INDUSTRIAL SPECIALITIES

 

PAL RUBPRO A 1000, N 20, P 30

PAL RUBPRO oils are specially developed to improve the processing, mixing operations and reduce compounding time. They modify the physical properties of finished product, minimize power consumption and reduces the cost.

These oils are classified into three groups viz. Aromatics, Paraffinics and Naphthenics.

PAL RUBPRO-A1000 is an aromatic type of oil and is dark in colour. Recommended for use in the manufacturer of automobile tyres, beltings etc. where colour is not an important factor.

PAL RUBPRO-N20 is naphthenic type of oil. It has fairly good colour stability and good high temperature properties. Recommended for use in the manufacture of footwear, mats, moulded and extruded goods.

PAL RUBPRO-P30 is paraffinic type of oil. It is light in colour and has good high temperature properties. Recommended for use in butyl and ethylene propylene rubber for the manufacturer of light coloured rubber goods viz. toys, shoe soles, sports goods and white walled tyres etc.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr.No.

Properties

PAL RUBPRO

   

A 1000

N 20

P 30

1.

Kin. Viscosity, cSt at 100°C

22-26

-----

-----

2.

Kin. Viscosity, cSt at 40°C

-----

20-24

30-35

3.

Flash Point, COC, °C, Min

200

160

190

4.

Pour Point, °C, Max.

30

-6

-----

5.

Aniline Point, °C, Min.

40

75

90

6.

Molecular Analysis ASTM D 2007

 

 

 

 

a) Asphattnes wt.%

<0.09

Nil

Nil

 

b) Polar Compounds wt.%

9.00

2.20

0.60

 

c) Aromatics wt.%

68.60

47.80

20.50

 

d) Saturates wt. %

22.40

50.00

78.90

* The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Industrial Specialities
Pal HTG-1,2
Pal EHT-30,60,100
Pal Teflith
Palsifier-600
Pal SNG-1000
Pal Viscoin-2000
Pal Rubpro
Semi Synthetic Heat Transfer
Semi Synthetic Refrigeration
Synthetic Lubricants

Site Powered by createsoftsolutions.com