Paras Lubricants - Industrial Gear Lubricants Manufacturer - Zinc Type  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Oils - Industrial Gear Lubricants Manufacturer - Zinc Type

HOME » PRODUCTS » Industrial oils » PAL INGOL Zn

 
 

PAL INGOL Zn-68,100,150,220,320,460,680

 
INDUSTRIAL OILS  

These are zinc based antiwear industrial gear lubricants, specially developed for the lubrication of enclosed gear sets including spur, helical and bevel designs and provide protection under non-critical conditions. Due to good film strength property, thermal and chemical stability these oils provide strong protection to mating surfaces thereby extending life of the gears.

These oils are formulated with high quality base stocks and carefully selected antioxidant, antirust, anticorrosion, antifoam, and antiwear additives. PAL INGOL Zn is suitable for systems operating under moderate to severe conditions where a high level of anti-wear protection is required.

Recommended for use in a wide range of enclosed and semi-enclosed gear systems having spur/straight bevel/spiral bevel/worm/herring-bone/helical types of gears, industrial, plain and roller bearings, sliding surfaces, chain drives, sprockets, flexible coupling etc. especially operating under non-critical conditions.

These are not suitable for foods and drug industries and those required to be operated under extremely severe and hostile environment viz. gear drives operating at speed over 3600 rev/min and/or pitch-line velocities exceeding 1500m/min and lubricant’s sump temperatures generally exceeding 110ºC.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PAL INGOL Zn

68

100

150

220

320

460

680

1.

Kinematic Viscosity, cSt @ 40ºC

61-74

90-110

135-165

198-242

288-352

414-506

612-748

2.

Viscosity Index, min.

90

90

90

90

90

90

90

3.

Flash Point, COC, ºC, min.

200

205

205

210

230

240

250

4.

Pour Point, ºC, max.

-6

-6

-6

-6

-6

-3

-3

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Pal Rex
Pal Lube
Paltherm-500,600
Paltherm S -Light.Medium
Pal Rock Drill-L,H
Pal SMR-2, 3
Palkut SL,SL Super
Pal Synco-100,200
Pal Synco-300,400
Palkut ST
Pal Rustrans-L,H
Pal Rustnil-L,H
Pal Rustop -910,920,940
Pal Rustop -247
Pal Rustop -930
Pal Oil Reserve
Palquench - S,C,H,HC
Pal Draw ST,ST-2,EP
Pal Forge 68,100
Pal ST Gear-90,140
Pal Glass Mould
Pal Ingol Zn
Pal Ingol EP
Pal OGC-120,140
Phydol (R&O)
Phydol AW
Phydol HLP
Pal Turbine
Palcomp C-100,150,220,320
Palcomp -32,46,68,100,150
Pal Hone
Pal Way-32,68,100,120
Palknit-22,32
Pal Powerfluid-20
Pal Woolpro-23
Pal Spin-10,12,22
Pal Loom
Pal SAE-40,20W40
Pal Hylube- 40,20W40
Pal PMG- 20W40(Shaktiman)
Pal PPG4-15W40,PPG4-20W40
Pal Marine
Pal Flush
Pal Cyl
Mineral based refrigeration oils
Semi-Synthetic refrigeration oils
Industrial Greases
Industrial Specialities
Shock Absorber Oil
Synthetic Lubricants

Site Powered by createsoftsolutions.com