Paras Lubricants - Hydraulic Brake Fluid Manufacturer, BRAKE FLUID-HAWK DOT-3  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Car Care - Hydraulic Brake Fluid Manufacturer, BRAKE FLUID-HAWK DOT-3
HOME » PRODUCTS » Car Care » HAWK DOT- 3
 
 
 
 
Hawk Dot 3 - Brake Fluid
 
 

BRAKE FLUID-HAWK DOT-3

 

CAR CARE

 

It is a non-petroleum base, polyglycol type brake fluid meeting DOT-3 performance requirements. It is designed for use in brake and clutch system, fitted with rubber cups and seals made from natural rubber (NR), styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM).

PRODUCT FEATURES

Clear homogeneous liquid.

 

High boiling point, eliminating the vapour locking problems.

 

Excellent lubricating properties.

 

Formulated with selected ingredients along with antioxidants, metal deactivator, corrosion inhibitor and a pH booster.

 

Correct fluidity and kinematics viscosity.

 

APPLICATIONS

Hydraulic braking system of modern fuel efficient motor vehicles such as passenger cars (Maruti, Hyundai, Fiat, Tata, etc.), trucks, buses, tractors, trailers, heavy earth moving machinery etc. operating under moderate duty service conditions.

PRECAUTIONS

Avoid contact of brake fluid with the skin and eyes.

 

Fluid blend or drained from a system may be contaminated with corrosion sludge's, moisture, road dirt, etc. and should not be used.

Extreme caution should be exercised to prevent accidental entry of water, which might lead to brake failure and contribute to corrosion.

Paint work may get affected.

 

Contamination of brake fluid with mineral oil or petroleum-derived products must be avoided, as these can cause swelling and deterioration of the rubber parts fitted to brake systems, thus causing complete brake failures.

PERFORMANCE LEVEL

SAE J 1703 F, IS 8654-2001 and  FMVSS No. 116 DOT -3 specifications.

PACKING

CHARACTERISTICS

Sr.No.

Properties

HAWK

1.

Kinematic viscosity, cSt, @ -40ºC, max.

1500

2.

Kinematic viscosity, cSt,@ 100ºC, min.

2.5

3.

pH Value

7 to 11.5

4.

ERBP, °C, min.,

Dry - 215 , Wet -140

5.

Colour

Red (crimson)

6.

Rubber swelling properties

Passes

* The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document s
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Brake Fluid
Coolant Ultra & Extra Cool
Coolant Icy & Mint Kool
C.V Joint Grease
Industrial Oils
Industrial Greases
Industrial Specialities
Synthetic Lubricants

Site Powered by createsoftsolutions.com