Paras Lubricants - High Temperature Industrial Grease Manufacturer, PAL HTG-1,2  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Specialities - High Temperature Industrial Grease Manufacturer, PAL HTG-1,2

HOME » PRODUCTS » Industrial specialities » PAL HTG-1,2

 
 

PAL HTG-1,2

 
INDUSTRIAL SPECIALITIES  

These greases are formulated from a special blend of high viscosity solvent refined base oil, thickened with bentonite clay. They have smooth structure, ability to retain their consistency under increasing temperatures; offer excellent resistance to chemicals such as mild acids and alkalies besides having good water repellency characteristics.

These greases meet IS 12790-1999 grade 3, U.S.Steel No.372 requirements and IPSS:1-09-008 specifications. These greases are suitable for the lubrication of machine elements, plain bearings and anti-friction bearings operating at high temperatures between 120C to 250C.

Recommended for use in industrial ball and roller bearings, kiln car wheel bearings, furnace door bearings, heat exchange motor bearings, oven conveyor bearings and other applications where extremely high temperatures are encountered. These greases gives optimum performance when used in applications up to 135°C with normal re-greasing, and up to 250°C with frequent re-greasing, making it suitable for use in a wide range of high temperature applications.

These greases are not compatible with soap type greases. Bearings must be thoroughly cleaned before changing over to Bentonite type greases.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this grease is injurious to health. Clean properly with soap and water.

Grease: Grease should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PAL HTG-1

PALT HTG-2

1.

Appearance

Dark Brown

2.

Soap Type

Bentonite Clay

3.

Base Oil Type

Mineral

4.

Base Oil Viscosity, @40°C

460

5.

Viscosity Index of base oil, min.

90

6.

Cone Penetration, @25°C±0.5°C

310-340

265-295

7.

Drop Point, °C min.

280

280

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Industrial Specialities
Pal HTG-1,2
Pal EHT-30,60,100
Pal Teflith
Palsifier-600
Pal SNG-1000
Pal Viscoin-2000
Pal Rubpro
Semi Synthetic Heat Transfer
Semi Synthetic Refrigeration
Synthetic Lubricants

Site Powered by createsoftsolutions.com