Paras Lubricants High Temperature Grease Manufacturer, MoS2 based, EHT-30,60, 100  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
High Temperature Grease Manufacturer, MoS2 based, EHT-30,60, 100

HOME » PRODUCTS » Industrial specialities »PAL EHT-30,60,100

 
 

PAL EHT-30,60,100

 
INDUSTRIAL SPECIALITIES  

These greases are multipurpose non-soap base grease made from a heat resistant bentonite thickener, compounded with EP additives and finely dispersed molybdenum disulphide (MoS2), which is very effective solid lubricant with extremely good anti-scuffing characteristics. They are engineered to resist rust, oxidation and corrosion while reducing wear besides excellent ability to withstand high temperature and severe shock load conditions. In addition, these greases have excellent resistance to water washout and do not get affected by mild acids and alkalies.

Recommended for lubrication in all areas of industrial, automotive, farm machinery and other off-road applications These greases meet IS 12790-1999 grade3, U.S.Steel No.372 requirement and IPSS:1-09-008 specifications. These greases are widely used for the lubrication of machine elements, plain bearings and anti-friction bearings operating at high temperatures between 120C to 250C. These greases gives optimum performance when used in applications up to 135C with normal re-greasing, and up to 250C with frequent re-greasing, making it suitable for use in a wide range of high temperature applications.

These greases are not compatible with other greases. Former grease must be completely removed and cleaned from bearings before using greases described in this product bulletin.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this grease is injurious to health. Clean properly with soap and water.
Grease: Grease should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PAL EHT-30

PAL EHT-60

PAL EHT-100

1.

Appearance

Black

2.

Soap Type

Bentonite

3.

MoS2

3%

6%

10%

4.

Base Oil Type

Mineral

5.

Base Oil Viscosity, @40°C

460

6.

Viscosity Index of base oil, min.

90

7.

Cone Penetration, @25°C±0.5°C

265-295

8.

Drop Point, °C,min.

280

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Industrial Specialities
Pal HTG-1,2
Pal EHT-30,60,100
Pal Teflith
Palsifier-600
Pal SNG-1000
Pal Viscoin-2000
Pal Rubpro
Semi Synthetic Heat Transfer
Semi Synthetic Refrigeration
Synthetic Lubricants

Site Powered by createsoftsolutions.com