Paras Lubricants - Heat Transfer Fluid Manufacturers - Industrial Oil - Mineral Oil Based  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Industrial Oils - Heat Transfer Fluid Manufacturers - Mineral Oil Based

HOME » PRODUCTS » Industrial oils » PALTHERM - 500, 600

 
 
 

PALTHERM -500,600

 
INDUSTRIAL OILS  

These are high performance products designed for heat transfer in Textile, Pharmaceutical, Chemical and Processing Industries, equipped with indirect or secondary heating systems. They possess excellent resistance to thermal cracking and chemical oxidation and are non-corrosive and non-toxic. They possess high specific heats and thermal conductivities that provide good heat transfer efficiency and their viscosities are such that they can be pumped readily at both start-up and operating temperatures.

PALTHERM Heat Transfer Fluids are formulated from very stable high viscosity index base oils, coupled with a low pour point and fortified with high temperature oxidation inhibitors.

Recommended for use in closed, forced circulation with indirect or secondary heating systems, equipped with expansion tanks. The temperature of the oil film surrounding the heating element should be about 15ºC to 30ºC above the bulk oil temperature. Higher than this may lead to deposit of sludge and coke which would interfere with the heat transfer rates and also shorten the service life of the oil.

PALTHERM-500 and PALTHERM-600 grades are suitable for heat transfer up to 290ºC and 310ºC respectively.

These oils are not recommended for use in open systems where hot oil is exposed directly to the air. If they spray or escape from leakage points, hot oils may spontaneously ignite.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.
Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr. No.

Properties

PALTHERM

500

600

1.

Kinematic Viscosity, cSt @40ºC

28-32

32-35

2.

Viscosity Index, min.

95

95

3.

Flash Point, COC,ºC, min.

200

210

4.

Pour Point, ºC, min.

-3

-3

5.

Copper Strip Corrosion, 3 hrs. @100ºC, (ASTM), max.

1

1

6.

Neut. Number, mg KOH/gm., max.

0.15

0.15

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Pal Rex
Pal Lube
Paltherm-500,600
Paltherm S -Light.Medium
Pal Rock Drill-L,H
Pal SMR-2, 3
Palkut SL,SL Super
Pal Synco-100,200
Pal Synco-300,400
Palkut ST
Pal Rustrans-L,H
Pal Rustnil-L,H
Pal Rustop -910,920,940
Pal Rustop -247
Pal Rustop -930
Pal Oil Reserve
Palquench - S,C,H,HC
Pal Draw ST,ST-2,EP
Pal Forge 68,100
Pal ST Gear-90,140
Pal Glass Mould
Pal Ingol Zn
Pal Ingol EP
Pal OGC-120,140
Phydol (R&O)
Phydol AW
Phydol HLP
Pal Turbine
Palcomp C-100,150,220,320
Palcomp -32,46,68,100,150
Pal Hone
Pal Way-32,68,100,120
Palknit-22,32
Pal Powerfluid-20
Pal Woolpro-23
Pal Spin-10,12,22
Pal Loom
Pal SAE-40,20W40
Pal Hylube- 40,20W40
Pal PMG- 20W40(Shaktiman)
Pal PPG4-15W40,PPG4-20W40
Pal Marine
Pal Flush
Pal Cyl
Mineral based refrigeration oils
Semi-Synthetic refrigeration oils
Industrial Greases
Industrial Specialities
Shock Absorber Oil
Synthetic Lubricants

Site Powered by createsoftsolutions.com