It is a non-petroleum base, polyglycol type brake fluid meeting DOT-3 performance requirements. It is designed for use in brake and clutch system, fitted with rubber cups and seals made from natural rubber (NR), styrene-butadiene rubber (SBR), or a terpolymer of ethylene, propylene, and a diene (EPDM).
PRODUCT FEATURES
 |
Clear homogeneous liquid. |
|
|
High boiling point, eliminating the vapour locking problems. |
|
|
Excellent lubricating properties. |
|
|
Formulated with selected ingredients along with antioxidants, metal deactivator, corrosion inhibitor and a pH booster. |
|
|
Correct fluidity and kinematics viscosity. |
|
APPLICATIONS
Hydraulic braking system of modern fuel efficient motor vehicles such as passenger cars (Maruti, Hyundai, Fiat, Tata, etc.), trucks, buses, tractors, trailers, heavy earth moving machinery etc. operating under moderate duty service conditions.
PRECAUTIONS
|
Avoid contact of brake fluid with the skin and eyes. |
|
|
Fluid blend or drained from a system may be contaminated with corrosion sludge's, moisture, road dirt, etc. and should not be used. |
|
Extreme caution should be exercised to prevent accidental entry of water, which might lead to brake failure and contribute to corrosion. |
|
Paint work may get affected. |
|
|
Contamination of brake fluid with mineral oil or petroleum-derived products must be avoided, as these can cause swelling and deterioration of the rubber parts fitted to brake systems, thus causing complete brake failures. |
PERFORMANCE LEVEL
SAE J 1703 F, IS 8654-2001 and FMVSS No. 116 DOT -3 specifications.
PACKING
210 Ltr., 20 Ltr., 500 ml, 250 ml, 100 ml.
CHARACTERISTICS |
Sr.No. |
Properties |
HAWK |
1. |
Kinematic viscosity, cSt, @ -40ºC, max. |
1500 |
2. |
Kinematic viscosity, cSt,@ 100ºC, min. |
2.5 |
3. |
pH Value |
7 to 11.5 |
4. |
ERBP, °C, min., |
Dry - 215 , Wet -140 |
5. |
Colour |
Red (crimson) |
6. |
Rubber swelling properties |
Passes |
| * The specifications are subject to variations/development/customization. |
|
|
