Paras Lubricants - Emulsifier Package Metal Working Fluids Manufacturers, PALSIFIER-600  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Emulsifier Package Metal Working Fluids Manufacturers, PALSIFIER-600
HOME » PRODUCTS » Industrial Specialities » PALSIFIER - 600
 
 
 

PALSIFIER-600

 

INDUSTRIAL SPECIALITIES

 

PALSIFIER-600 metalworking package is used to formulate soluble oil metalworking fluid concentrates that form stable macro-emulsions when diluted with water (upto 600 ppm hard water) at the manufacturing site, for metal removal, metal forming, and other water-extendable lubricant applications. This product is balanced combinations of emulsifier chemistry designed to control acidity, foam, mist, metal staining, friction, tool breakage, odor, oxidation, corrosion inhibition, and supplemental lubricity to the finished fluid. Basic metalworking fluid concentrates can be created by dilution of the package in the appropriate percentage of Solvent Neutral/Base oil.

CHARACTERISTICS

Sr.No.

Properties

Test Methods

PALSIFIER- 600

1.

Appearance

Visual

Clear, Brownish Red, free flowing High Viscosity Liquid

2.

Acid Value

IP-182

10 Max.

3.

Sp. Gravity @ 27° C

IS – 1448(P.16)

1.05 ± 0.05

4.

pH (5% Solution).

PH Meter

8 – 10

5.

Solubility

Visual

Soluble in Mineral Base oil

6.

Solubility in Water

Visual

Gives Emulsion

7.

Thermal Stability(at 50° C)

IP-311

Stable

8.

Cast Iron Corrosion Test.

IP-125

Passes

9.

Copper Strip Corrosion Test.

ASTM-D 130

Passes

10.

Storage Stability (upto 5°C)

-----

Clear liquid

* The specifications are subject to variations/development/customization.

Recommended Treat Rate

PALSIFIER 600 is used at 20: 80 by v/v of Base oil. (Viscosity, Max. @ 40C: 30 cSt.) in formulation of soluble cutting oil meeting performance requirements of IS: 1115 -1986 standards. (Note: To achieve clear transparent fluid give correction with Oleic Acid only, max. upto 3 %.)

Test Report of Cutting Oil

Sr.No.

Properties

Test Methods

PALSIFIER- 600

1.

Appearance

Visual

Amber Colour, Clear Transparent

2.

Kin.Visc. cSt@40 °C,Max.

ASTM-D 445

50-70

3.

Density @ 29° C

IS 1448(P16)

0.9040

4.

pH of 5% Solution

PH Meter

8.0± 0.50

5.

5% Emulsion Test

IP – 263

Pass

6.

Emulsion Stability in 600 ppm Hard Water

IP – 263

Stable for 72 hrs

Note: Kin.Visc.of the Cutting Oil shall vary w.r.t grade of base oil used.

STORAGE: The drums should be placed on their side only duly protected against direct sunlight, rain, moisture and frost.

SHELF-LIFE: Maximum-6 Months.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water. To be disposed through licensed/authorized collector of lubricants only.

Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Industrial Greases
Industrial Specialities
Pal HTG-1,2
Pal EHT-30,60,100
Pal Teflith
Palsifier-600
Pal SNG-1000
Pal Viscoin-2000
Pal Rubpro
Semi Synthetic Heat Transfer
Semi Synthetic Refrigeration
Synthetic Lubricants

Site Powered by createsoftsolutions.com