Paras Lubricants - Circulation, Hydraulic Oil Manufacturer, PHYDOL HLP  
  Home Careers Contact Us
 
 
Home About Us Products QUALITY POLICY R & D MILESTONES AMBASSADOR FAQ CONTACT US
 
Circulation, Hydraulic Oil Manufacturer, PHYDOL HLP

HOME » PRODUCTS » Industrial oils » PHYDOL HLP

 
 
 

PHYDOL HLP-32,46,68,100

 
INDUSTRIAL OILS  

These are high performance heavy-duty oils, primarily intended for applications where oil is used for extended period in circulation & hydraulic systems in wide range of industrial equipment and subjected to wide variations in ambient and operating temperatures. They possess good demulsibility that permits water and other contaminants to separate readily from the oil in the system reservoir. They are incompressible and remain in a fluid enough state to allow effective power transmission besides having outstanding antiwear, antirust, good air release, anti-foam, and oxidation resistance properties.

Recommended for use in hydraulic systems employing gear, vane, radial and axial piston pumps where anti-wear hydraulic fluids are required and clearances are relatively large. Due to their low pour point, they are recommended for sophisticated high performance electro-hydraulic or numerically controlled systems. They are also recommended for use in hydraulic couplings, injection moulding machineries, certain screw compressors and vacuum pumps handling air and inert gases provided the discharge temperatures do not exceed 150°C. They are suitable as multipurpose lubricants in systems and perform well at the elevated temperatures but not suitable for shock loading and extreme pressure.

PERFORMANCE LEVEL

IS 11656-1986 (Reaffirmed1993), DIN 51524 Part-2,US Steel 127,Dension HF-0&HF-2, Cincinnati Milacron P-68, P-69, P-70 specifications. It also passes Vickers Vane Pump Test.

PRECAUTION

Health: This product is not expected to produce adverse effects on health when used for the intended application. However prolonged or repeated skin contact with this oil is injurious to health. Clean properly with soap and water.

Environment: Lubricant should not be disposed in drain, soil and water.  To be disposed through licensed/authorized collector of lubricants only.

PACKING

CHARACTERISTICS

Sr.No

Properties

PHYDOL HLP

32

46

68

100

 

1.

Kinematic Viscosity, cSt @40ºC

29-35

42-50

64-72

95-105

2.

Viscosity Index, min.

100

100

100

95

3.

Flash Point, COC, ºC, min.

180

185

210

210

4.

Pour Point, ºC, max.

-18

-15

-12

-9

5.

Copper Strip Corrosion, @100ºC for 3 Hrs. (max.)

1

1

1

1

6.

FZG Pass Load Stage, min.

10

10

10

10

7.

Rust Properties
(ASTM D 665, 24/hrs.)

--------------Pass--------------

8.

Zinc, % wt. (ICP Emission)

0.048 – 0.055

9.

Phosphorus, % wt (ICP Emission)

0.038 – 0.043

 * The specifications are subject to variations/development/customization.
Go to Top
  Untitled Document
Automotive Engine Oils
Automotive Gear Oils
Automotive Greases
Car Care
Industrial Oils
Pal Rex
Pal Lube
Paltherm-500,600
Paltherm S -Light.Medium
Pal Rock Drill-L,H
Pal SMR-2, 3
Palkut SL,SL Super
Pal Synco-100,200
Pal Synco-300,400
Palkut ST
Pal Rustrans-L,H
Pal Rustnil-L,H
Pal Rustop -910,920,940
Pal Rustop -247
Pal Rustop -930
Pal Oil Reserve
Palquench - S,C,H,HC
Pal Draw ST,ST-2,EP
Pal Forge 68,100
Pal ST Gear-90,140
Pal Glass Mould
Pal Ingol Zn
Pal Ingol EP
Pal OGC-120,140
Phydol (R&O)
Phydol AW
Phydol HLP
Pal Turbine
Palcomp C-100,150,220,320
Palcomp -32,46,68,100,150
Pal Hone
Pal Way-32,68,100,120
Palknit-22,32
Pal Powerfluid-20
Pal Woolpro-23
Pal Spin-10,12,22
Pal Loom
Pal SAE-40,20W40
Pal Hylube- 40,20W40
Pal PMG- 20W40(Shaktiman)
Pal PPG4-15W40,PPG4-20W40
Pal Marine
Pal Flush
Pal Cyl
Mineral based refrigeration oils
Semi-Synthetic refrigeration oils
Industrial Greases
Industrial Specialities
Shock Absorber Oil
Synthetic Lubricants

Site Powered by createsoftsolutions.com